Tuesday, February 7, 2017

An Overview On Refrigerant Leak Detection System

By Shirley Powell

Every professional technician who has the right skills must have a good understanding of the different methods of checking leaks in a refrigerator. This is important as such a problem has become common with most of the refrigerators leading to the necessity of such experts to rectify the situation. Homeowners should be careful when picking a technician and go for someone who has the best refrigerant leak detection system.

Leaks usually arise in any sealed device. This is mainly because the flaws are present in each weld, seam and joint fitting. This is why it is not simple for one to detect such problems early. However, this article highlights some of the suitable methods that will help one in detecting the leaks from the refrigerator.

The vapors of a refrigerant are capable of flowing under the layers of a pipe insulation, rust, flux, and paint. This is why it is always important to ensure that you clean the site of leaks by removing the rust, loose paint or slag. Oil and grease must also be removed from the leak site since they can contaminate the electronic detectors which are very delicate. Diagnosing the issue can be easy but detecting the actual problem is not easy.

It is also imperative for the technician to apply different methods rather than one leakage detection method when identifying the problem. This will assist in locating some of the main areas of a leak as well as the exact location of such leaks. The most common methods that are also effective include refrigerant dyes, electronic detectors, soap bubbles and also visual inspection.

Visual inspection is a simple way of detecting such problems. When there are leaks within your refrigerator, then the surrounding of the leaks will get stained by the oil. Therefore when cleaning, you should ensure that you visually inspect your device for any sign of oil which could arise because of such leaks.

The use of common soap may also aid a lot. This involves mixing the soap with water so as to come up with a solution that can give out bubbles once applied on an area that may have a leakage within the device. This approach is usually helpful when there is the presence of pressure. One has to be caution during this process as it can freeze the fitting which can result in corrosion.

Most electronic detectors usually detect this kind of leakage. Nonetheless, this has to be done by someone who has the right experience who can verify the device before it is used. There are different detectors which need proper care to deliver the required services. This includes changing the sensors after a certain period. Their operation has to be tested first to eliminate any chance of time wastage.

Some refrigerant dyes may also be applied during this process. This is mainly because they are capable of detecting any type of leakage that the device may have by injecting the refrigerant dye into its system. The dye will mix with the oil and make it possible for the leaking point to develop a dye stain. These are just but a few of the effective methods that have to be outlined in solving a leakage problem, therefore make sure you choose a proper method that suit will suit your needs.

About the Author:

No comments:

Post a Comment