Wednesday, November 1, 2017

Guidelines To Follow When Doing Carpet Repairs Lawrenceville GA

By Paul Jones


With little advice of what you should do when your mat is damaged, it is possible for homeowners to do repairs on their own. This can help one save on the costs and also have the carpet service them for an extended period. By learning the simple steps to follow when doing carpet repair one should be able to do it in the comfort of their home. In this discussion, the stress will be on the guidelines that can help one do carpet repairs Lawrenceville GA.

Getting the measurements of all the areas that need repair will help you in determining the extent of damage and the dimensions of the replacement material. After getting the measurements, one can go ahead and cut the place since you have the size of the replacement material needed. Avoid getting the replacement material before measuring and cutting the damaged area.

Second, it is vital that one tapes the area that needs repair. Use a duct tape to outline the place to be removed and take the measurements of the same. The measurements obtained should help one to measure the inside edges of the tape and ensure that it matches the dimensions. One should keep a piece in store for repair purposes.

Third, you have to remove the section that has the damage carefully, to avoid any mistakes of cutting extra areas. There are various tools that you can use to help you cut along the insides of the duct tape. Ensure that you use enough pressure to cut through the rug, and also you make sure that the underlying layer is left intact.

After you have cut off the damaged part, use the same measurements to cut a patch that you are going to use for repair. Your previous estimations should help you in coming up with the exact part. One can use markings on the mat to get the correct dimensions. It is advisable that one uses the correct cutting tools to cut the repair piece.

Go ahead and prepare the mat that requires repair. It is essential that the rug is in the correct position so that you will be able to fix the patch smoothly. After having it in the right area take your time to place it in the correct direction so that it does not appear as a replacement.

When you are okay and convinced that the direction that the patch has faced matches the other patterns, you can go ahead and apply glue around the place. Make sure that the adhesive is enough to have the piece in position with no movements. Go ahead and trim all the parts that you feel are making the mat not to look like the original piece.

In conclusion, make sure that the set glue has dried and the patch is intact, you need to smoothen the place to make it look alike. All the fibers should align to the same direction. Various methods like use of vacuum cleaner can help when doing the alignment.




About the Author:



No comments:

Post a Comment